Setting Of Date And Time; Figure 3.16 [Date/ Time] Window Example - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.3 Connection and Setting of MMB

3.3.12 Setting of Date and Time

The date, time and NTP (In case of NTP server) of the MMB is set
However, occasionally it is already set by the field engineer. If it is already set by the field engineer and if it is not required to
be changed, go to the next setting.
For the backup of the set information,
Remark
MMB provides NTP client function. The NTP client function of MMB adjusts the time on the basis of another NTP Server.
For a stable NTP operation, specify multiple NTP Servers from each NTP client (In case of RHEL more than three servers
are recommended).
Operations of [Date/ Time] window
1. Click [Network Configuration] - [Date/Time].
→ [Date /Time] window is displayed. For details on [Date /Time] window, see "1.5.1 [Date/Time] window" of
PRIMEQUEST 2000 series Tool Reference (CA92344-0539).
2. Input required items.
3. Click [Apply] Button.
Operations of [Management LAN Port Configuration]
1. Click [Network Configuration] - [Management LAN Port Configuration].
→ [Management LAN Port Configuration] window is displayed. For details of [Management LAN Port Configuration]
window, see "1.5.3 [Management LAN Port Configuration] window" of PRIMEQUEST 2000 series Tool Reference
(CA92344-0539).
see"3.5 Storage of the configuration
[Date/ Time] Window Example
FIGURE 3.16
information".
30
CA92344-0536-01