Setting Of Software Watchdog; Completion Of Vmware 5.X Installation; Installation Of The Bundled Software; Procedure Of Hyper-V Installation - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 4 Installation of Operating System and bundled software

4.9 Procedure of Hyper-V installation

a. After turning on the power supply of the partition, while the FUJITSU logo is displayed, press any key (such as
[Space] key) except [Enter] key and the Boot Manager front page is displayed.
b. The menu is selected on the Boot Manager front page in the following order. [Boot Maintenance Manager]-
[Boot Options]-[Change Boot Order]-[Change the order]
c. For UEFI aware OS, UEFI: Fujitsu Virtual CDROMx xxx is set at the upper-most step.
For Legacy OS, Fujitsu Virtual CDROMx xxx is set at the upper-most step.
For details on the setting method of boot order, see "■ Change Boot Order of "3.5.2 [Boot Options] menu" of
PRIMEQUEST 2000 series Tool Reference (CA92344-0539).
d. [Commit Changes and Exit] - [Reset System] is specified and the partition is rebooted.
3. After a period of time, the language selection window is displayed.
In case of English, select "English".
4. In initial display window, click [Next] button without setting anything.
5. Select [Deployment] in [Welcome ServerView Installation Manager] window.
6. Select installation mode, select operating system to be installed and set the operating system.
Remark
The IP address of LAN cannot be set in setting operating system. Set IP address after installing the operation system.
7. Click [Start installation].
The installation is started.
8. Replace with the installation medium of operating system according to the instructions of SVIM.

4.8.4 Setting of software watchdog

Watchdog Timer allows reboot OS in case that OS freezes.
For details, see "8.4 Automatic Partition Restart Conditions" of PRIMEQUEST 2000 series Administration Manual
(CA92344-0537).

4.8.5 Completion of VMware 5.x installation

Reboot the partition of PRIMEQUEST 2000 series after the completion of setting.

4.8.6 Installation of the bundled software

For the installation of bundled software, see "Installation of D.2 VMware 5.x bundled software".
4.9 Procedure of Hyper-V installation
Install Hyper-V after installing the operating system (Windows Server 2008 R2, Windows Server 2012 or Windows Server
2012 R2).

4.10 Procedure of KVM installation

Install KVM after installing the operating system (Linux RHEL6).
See the following for the installation procedure of KVM.
PRIMEQUEST 2000 Series Simple Construction Guide (Linux/KVM edition).
Rebooting OS is executed when the set time passes,
80
CA92344-0536-01