Panasonic KX-UDS124 Installation Manual page 68

4 Deployment Procedure
5.
Enter the Phone Number, and enter Authentication ID and Authentication Password if necessary.
6.
Click All Save.
7.
Click Back.
8.
Repeat steps 2 to 7 for each S-PS.
Note
If the S-PS name is too long to display, the end of the name may not be displayed on the S-PS's standby
screen.
Starting Registration Mode
After you have configured the S-PS name and SIP settings, follow the procedure below to register S-PSs.
1. In the System tab, select PS Registration ® Start PS Registration.
2.
Select the S-PSs to be registered in Available PS, and then click
To select all available S-PSs, click
3.
Click Next.
4.
Click OK to confirm registration.
Registering S-PSs
After entering PS Registration mode, follow the procedure below to register each S-PS.
For unregistered S-PS
1.
Display the standby screen below.
*1 The symbol for the centre soft key (Menu) differs depending on the country/area.
68 Installation Guide
. To deselect S-PS(s), click
.
or .