Example Of How To Make A Site Map - Panasonic KX-UDS124 Installation Manual

4.5 Example of How to Make a Site Map

1.
Write down the MAC address of each CS on the map. (The MAC address is written on the rear side of
each CS.)
In case of network trouble, you can confirm which CS is not connected using the map.
Example of Site MAP (1)
(CS MAC addresses)
CS5
MAC address5
2.
Write down the radio signal values (RSSI and Error Rate) around the next CS location and near important
places such as meeting rooms, on the map.
You can use this as a guide when changing the location of the CS.
Example of Site MAP (2)
(Radio signal conditions)
PoE Hub
CS4
MAC address4
CS6
MAC address6
CS2_Point2
RSSI : 10
Error : 02%
CS2
(Location2)
CS Area Check using PS
Power
Source
CS
coverage area c
MAC address2
CS1
MAC address1
CS7
MAC address7
MAC address8
CS1
(Location1)
CS1_Point2
RSSI : 11
Error : 01%
RSSI : 10
Error : 01%
CS1_Point1
RSSI : 10
Error : 01%
4 Deployment Procedure
CS2 CS3
MAC address3
CS8
CS9
MAC address9
CS1_Point3
RSSI : 10
Error : 01%
CS2_Point1
CS1_Point4
RSSI : 12
Error : 01%
Installation Guide 41