Configuration And Ps Registration (For A System Using A Kx-Ns1000); Programming Using Web Maintenance Console - Panasonic KX-UDS124 Installation Manual

4.9 Configuration and PS Registration (for a system
using a KX-NS1000)

4.9.1 Programming using Web Maintenance Console

The following items must be programmed using the KX-NS1000's Web Maintenance Console.
•
V-UTEXT32 card (Virtual UT Extension Card)
•
Extension settings for S-PSs
•
Extension number for the Super master CS
Logging into Web Maintenance Console
1.
Connect a PC to the KX-NS1000.
2.
Access Web Maintenance Console.
When the PC is connected to the KX-NS1000 on the same LAN, launch your Web browser and input the
IP address of the PBX followed by the Web Maintenance Console port number into the address bar.
The default IP address for the LAN port of the PBX is 192.168.0.101, and the default Web Maintenance
Console port number is 80. Accordingly, the address to enter to connect to the PBX for the first time will
be as follows (enter the address exactly as shown):
http://192.168.0.101
Note
The default subnet mask for the LAN port is 255.255.255.0.
3.
The Web Maintenance Console login screen is displayed. Log in with the Installer account.
4 Deployment Procedure
Installation Guide 51