Assigning an extension number to an S-PS
1.
Click Setup ® PBX Configuration ® Configuration ® Slot ® Virtual.
2.
Click on the V-UTEXT32 tab.
3.
Move the mouse pointer over the V-UTEXT32 card (Virtual UT Extension Card).
A menu will be shown under the mouse pointer.
4.
Click Port Property.
5.
Enter the desired extension number in the Extension Name column.
6.
Click OK.
Programming Extension Settings
1.
Click Setup ® PBX Configuration ® Extension ® Wired Extension ® Extension Settings.
2.
Configure the extension name and required settings for the extension.
3.
Click OK.
4 Deployment Procedure
Installation Guide
53