Panasonic KX-UDS124 Installation Manual page 44

4 Deployment Procedure
Configuring Air Synchronisation Settings
Follow the procedure below to change the SIP-CS status to Master.
1.
In the System tab, select Air Settings.
2.
Select an Air Sync Group. (Group 1 must be selected for the Super Master CS.)
3.
In CS Class, select Master.
4.
Enter the IP address of the Super Master CS in IP Address. (This step can be omitted for the Super Master
CS.)
5.
Click Save.
The SIP-CS will restart automatically.
The SIP-CS is now set as an Air Sync Master CS. You may exit Site Survey Mode.
Changing the Administrator Password
Note
This setting is required only for the Super Master CS.
1.
In the System tab, select Administrator Password.
2.
Enter the default password in Current Password.
3.
Enter a new password in New Password.
4.
Enter the new password again in Confirm New Password.
5.
Click All Save.
44 Installation Guide