Safety Precautions - NEC ViVid Office 2020 Quick Reference Manual

Safety Precautions

Warnings
Cautions
Recommendations
STOP
Conditions on Installation
The ground cable must be connected.
In certain cases, a ground cable should be connected
to an independent earth ground. Do not connect the
ground to a gas pipe, lightning rod, water pipe, or a
telephone ground.
Do not place the machine in direct sunlight
or near a heater.
Such an environment may cause machine failure or
even a fire due to extreme temperatures inside the
machine chassis.
Do not place the machine on an uneven sur-
face, or somewhere that is subject to vibra-
tion or mechanical instability.
Such an environment may cause injury or failure if the
machine falls down or tips over.
Do not place the machine in an excessively
hot (over 86 degrees F) or cold (less than 50
degrees F) environment.
Doing so may result in erratic operation.
Do not install the machine in a location that
is subject to excessive vibration.
Doing so may cause improper operation or machine
damage.
This is a warning that indicates a hazard that can lead to serious injury or
death.
This is a caution that indicates a hazard that can lead to injury or damage to
property.
This is a recommendation that indicates a certain procedure should be fol-
lowed for proper performance.
Warnings
The ground cable must be connected before plug-
ging a power cord into the wall outlet and con-
necting a telephone cable, and must be
disconnected after unplugging a power cord from
the wall outlet and disconnecting a telephone
cord.
Cautions
Do not place the machine in a humid, dusty,
smoky, or steamy environment.
Such an environment may cause a fire, electric shock,
machine failure or poor performance in the scanning
and printing mechanisms.
Do not cover the ventilation grille on the
machine.
If this grille is blocked or covered, internal tempera-
ture will rise and may cause a fire or machine failure.
Recommendations
STOP
Do not place the machine in a location that is
subject to significant temperature changes
(such as near an air conditioner or heater).
Doing so may cause improper machine operation due
to excess temperature variations and increased con-
densation in the machine.
6