NEC ViVid Office 2020 Quick Reference Manual page 135

Alarm Messages
Messages
Misfeed detected.
Remove paper from part indicated by
the circle.
Properly close the section(s) indi-
cated by the arrow(s).
The original size cannot be detected.
Select the paper size.
The original size cannot be detected.
Select Zoom.
Replenish paper.
Paper of matching size is not avail-
able.
Select the paper size.
Selected paper is different from set-
ting Set paper in Tray 1.
Auto Zoom cannot be used.
Select the appropriate ratio.
Paper setting is not correct.
Please set paper correctly.
Memory is full.
Replace the Toner Cartridge.
Open the front door and follow the
instructions.
Causes
Print paper or document is jammed.
A cover of the machine is not closed
correctly.
Original size could not be detected.
Original size could not be detected.
There is no paper in the selected
tray.
There is no appropriate paper in any
tray that meets the document size
and scaling factor specified.
Selected paper does not suit to the
setting of Tray 1.
The scaling factor calculated from
the selected paper size and docu-
ment size is not within the proper
range (25%-400%).
Paper is not set correctly.
Memory is full.
Sixty-four documents are reserved.
The toner has run out.
5-3
Display Icons and Alarm Messages
Countermeasure
Remove the print paper or document from the indi-
cated area.
Refer to "Document Jam" on page
Refer to "Print Paper Jam" on page
Close the cover indicated by the arrow(s).
Re-load the document.
Refer to "Handling Documents" on page
Select the paper.
Refer to Operation Manual (Copy).
Re-load the document.
Refer to "Handling Documents" on page
Select the paper.
Refer to Operation Manual (Copy).
Set the proper scaling factor.
Refer to Operation Manual (Copy).
Load print paper.
Refer to "Installing Print Paper" on page
Select the paper.
Load the proper size print paper.
Refer to "Installing Print Paper" on page
Select the paper.
Refer to Operation Manual (Copy).
Set paper in Tray 1.
Refer to "Installing Print Paper" on page
Set the proper scaling factor.
Select the paper.
Refer to Operation Manual (Copy).
Reset the document along with the document
guide plate.
Refer to "Handling Documents" on page
Load paper correctly in the tray.
Refer to "Installing Print Paper" on page
Reserve for transmission after memory
becomes available.
Print out any documents waiting to be printed.
This will free up memory space.
Refer to "Confirming the Results of Transmis-
sion, Status of Printing Jobs, and Saved Docu-
ments (Job List)" on page 1-32.
Replace the toner cartridge.
Refer to "Installing and Replacing the Toner Car-
tridge" on page 4-6.
5-5.
5-8.
1-25.
5
1-25.
4-2.
4-2.
4-2.
1-25.
4-2.