NEC ViVid Office 2020 Quick Reference Manual page 10

Table of Contents

Advertisement

Safety Precautions
Do not touch the toner fixing unit located
inside the machine, or the area around it, as
it becomes extremely hot.
Some areas are hot enough to cause serious burn
injury.
Hold the solid plug when disconnecting the
power cord.
The power cord should be disconnected by holding
and pulling on the solid plug part and not on the cord
itself. Pulling on the cord may cause power cord dam-
age, resulting in a fire or electric shock.
Before moving the machine, first disconnect
the power cord and telephone/facsimile line
connection, and take out the imaging unit
and toner cartridges.
Failure to do so may damage the power cord and line
cable. Toner may be spilled out from cartridges due to
vibration, causing the damage to the machine.
Do not place the power cord near a heater.
This may cause the power cord to melt, thus exposing
internal wiring that can cause fire or an electric shock.
Do not touch the inside of the side cover or
the copper terminals located at the lower part
of the imaging unit.
Doing so may result in machine failure due to static
discharge.
Immediately wipe off any liquid dropped on
the surface.
Failure to do so may cause an electric shock or
machine failure.
Warnings
Cautions
Lift the machine in the positions indicated
when transporting the machine.
Lifting the machine using any other area may result in
injury to person or machine damage.
For product and property safety reasons, dis-
connect the power cord from the wall outlet
when this product is not to be used for pro-
longed periods.
Doing so will avoid the possibility of fire or machine
failure.
Clean the prongs of the power plug and sur-
rounding area at least once a year. Unplug
the power plug before cleaning.
Dust may cause a fire.
Use this machine in a well-ventilated area.
The amount of Ozone, which is generated in use of
printing unit, is not significant enough to cause a
health risk. However, the odor may be detected in the
case of operating the machine a long period of time
without good ventilation or making a great amount
copies. To avoid this good air ventilation is recom-
mended.
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents