NEC ViVid Office 2020 Quick Reference Manual page 78

Network Configuration
Setting Item
Scanner Settings
Activity Report
RX Doc. Header Print
E-Mail Header Text
Subject Registration
Division Settings
Gateway TX
IP Relay Settings
IP Relay Station Registration
Relay Result Port
RAW Port Number Settings
RAW Port Number Settings
* For the details, refer to Operation Manual (Network Application).
Specify [ON] or [OFF] for the result notification in case the Internet Fax (E-mail) transmis-
sion fails.
Refer to Operation Manual (Network Application).
REF.
Specify [ON] or [OFF] for printing a mail header when printing received documents of Inter-
net Fax (E-mail).
Refer to Operation Manual (Network Application).
REF.
Specify [ON] or [OFF] for inserting text describing the TIFF file that is attached when trans-
mitting Internet Fax (E-mail) or TX to E-mail / Scan to E-mail.
Refer to Operation Manual (Network Application).
REF.
Specify the subject when sending Internet Fax (E-mail) or TX to E-mail / Scan to E-mail.
Specify [ON] or [OFF] for the function of divided sending when sending TX to E-mail / Scan
to E-mail.
* This may not work depending on the recipient E-mail software.
The interval between mail transmissions for E-mail division can be set by the software
switch.
Specify [YES] to use as Internet Fax (IP Relay) relay station, and specify [NO] not to use
as Internet Fax (IP Relay) relay station.
Register the destination of the IP relay.
Specify the port to receive a transmission result of the IP relay.
Set the RAW Port Number for using TCP printing.
* Consult with the network administrator.
1-46
Action Needed