Table of Contents
Advertisement
SW-D7000U, 9CH. COLOR VIDEO MULTIPLEXER
To de-select the VCR as an input:
Repeat the above procedure.
NOTE:
When VCR VIEW is exited, the unit always reverts to Live mode.
3.6.5
SUMMER / WINTER TIME CHANGE
Setting the time requires the operator to know the menu password.
personnel with access to the menus are not available to reset the unit's clock during time
changes for summer and winter. The SW-D7000U provide a simple shortcut to set time forward
by an hour in Spring and back by an hour in the Fall, using the following Function key sequence.
To adjust the clock by an hour for Summer/Winter time changes press
FUNCTION
and then press the
In April, this will cause the time to adjust forward by one hour. In October, this will cause the time
to adjust back by one hour.
This function can only be used once in each period.
SEQUENCE
SEQUENCE
NOTE:
If the Master/Slave selection is used for setting one multiplexer of several in an
installation as a master clock, the Summer/Winter time change can be done on just
the Master unit. The master clock will control the time and date display for the other
multiplexers connected to the RS-485 network.
needs to be separately set up via the menu for either master or slave to function
properly.
3.6.6
MACRO FUNCTIONS
Macro Functions allow the operator to pre-program frequently used key sequences, and
frequently used menu setups. These can then be quickly executed as a two-keystroke function.
Up to nine (9) macros, each having 32 keystrokes, can be programmed, depending on the
number of cameras on the model.
Macros can be programmed to start at a fixed time and day of the week in the menu.
option allows the programmer to program up to 20 events, which will automatically run one of the
macro functions.
Scheduled events can be started on a preset time on a particular day of the week, or at a preset
time on every day of the week. Any macro can be started by each of the 20 scheduled events,
and a macro can be started by more than one event.
Keep a record of scheduled events for easy reference. A table is provided in the back of this
manual to list the scheduled events.
To Play a MACRO:
A macro can be Played back simply by pressing the
followed by the
macro can be stopped during its Playback by pressing the
30
JVC PROFESSIONAL, IMAGING PRODUCTS
SEQUENCE
is pressed during April it will add an hour to the time, but if
is pressed again then it will be ignored until October.
CAMERA
key that corresponds to the macro number 1-9. A
key.
For example, if
Each multiplexer in the network
FUNCTION
FUNCTION
In some installations
FUNCTION
+
FUNCTION
+
This
key,
key.
Advertisement
Table of Contents
