Play Mode: Monitor-B Displays; Play Mode: Changing Text Positions And Colors - JVC SW-D7000U Instruction Manual

9ch. color video multiplexer

Hide thumbs

Table Of Contents

Table of Contents

SW-D7000U, 9CH. COLOR VIDEO MULTIPLEXER

The indicator 'V' will be displayed in the corresponding camera cameo ( 'VDL' if full screen), if

there was video loss at the time that the recording was made.

NOTE:

Any camera which is not detected on tape for 8 or more consecutive cycles during

Playback, and is not flagged as a video loss camera, will result in the warning message

'N/A', signifying that it is Not Available.

appear during Playback on full-screen or multi-screen formats on Monitor-A.

Several circumstances can cause the 'N/A' indication:

The camera may not have been included in the record list at the time of recording.

The camera may have been disabled at the time of recording.

The images for that camera on tape have been corrupted and cannot be decoded at time

of Playback.

The VCR Play speed is very slow.

The 'N/A' indicator helps the operator to tell the difference between images that are not being

updated during Playback and images that are being updated from tape but have no movement

within the image.

The alarm indicator 'A' will be displayed with the corresponding camera image on Monitor-A if

there was an active alarm at the time that the recording was made.

Decoding of videotapes recorded on alternative multiplexers will have indicators as follows;

SW-D7000U – "

Calibur – "

Calibur Lite – "

Dedicated Micros – "

Robot – "

These indicators will appear only if the programmer or operator has selected the corresponding

menu option under the sub menu

on alternative multiplexers.

3.3.3