Rear Combination Light - Mitsubishi Electric 55624R(S)-MF Service Manual

REAR COMBINATION LIGHT

REMOVAL AND INSTALLATION
Pre-removal and Post-installation
Operation
@Removal and Installation of Trunk Room
Trim (Refer to GROUP 52-Trim.)
LIGHTING SYSTEM - Rear Combination
SERVICE POINTS OF REMOVAL
1. REMOVAL OF REAR COMBINATION LIGHT
SERVICE POINTS OF INSTALLATION
1. INSTALLATION OF REAR COMBlNATlON LIGHT
I
TSB Revision
tight
around the rear combination light.
combination light part while pulling the rear combina-
tion light toward you in order to remove it.
Caution
Take particular care when prying the rear combina-
tion light because excessive force or careless prying
might cause scarring of
or of the body surface.
surface and the rear combination light, and then use
unleaded petrol to remove any grease or oil from the
body side adhesive area.
Specified sealant: 3M ATD Part No.8625 or equiva-
lent
the
rear combination light