Antenna Assembly - Mitsubishi Electric 55624R(S)-MF Service Manual

Pole antenna
5
antenna)
1. Trunk room side trim
(Refer to GROUP 52-Trim.)
2. Antenna mast
3. Ring nut
4. Feeder wire connection
5. Antenna base
(Refer to GROUP 52-Trim.)
2. Ring nut
3. Harness connection
4. Feeder wire connection
5. Motor antenna assembly
Motor antenna
INSPECTION
<Vehicles built up to June 1988>
MOTOR ANTENNA ASSEMBLY
F o l l o w i n g i n s p e c t i o n s s h o u l d b e m a d e w i t h t h e h a r n e s s
connector disconnected from the power antenna relay.
extends. With the connection reversed, check that the
antenna mast retracts.
(2) Check for continuity between the terminals.
When the antenna mast is retracted
Between 6-9 . . . . . . . . . . . . . . . . . . . . ..continuity
When
the antenna mast is extended
Between 6-9 . . . . . . . . . . . . . . . . . . . . . .continuity
1