Table of Contents
Advertisement
A combo box appears displaying all drives in the computer with free space information. Select
the drive to backup the video files.
More than one drive can be selected to back up video files. When Drive F, G, and H are
selected, for instance, the backup program starts backing up files to Drive F, and then moves to
G and then H as the drives become full.
Backup files for all cameras are saved in the same drive. Once a backup drive is
selected, every backup file created afterwards is saved to that drive.
You cannot select a different backup drive for each unit.
5.1.5 Auto Removal Setup
Checking this option automatically deletes backup data from the backup hard disk or backup
drives if they do not have enough space. The backup program deletes the oldest backup files
from the hard disk or drives until enough space is freed up.
5.1.6 Backup Data Area Setup
Check which channels should be backed up.
You can select a backup timeline based on the recording time of a video file. You can backup
the video file only within the selected timeline, even if the video file contains data recorded up to
24 hours.
To select a timeline, click the hourly blocks. To deselect an hourly block, click the block again.
Using the channel checkboxes from Ch1 to Ch16 (32), you can backup data from only the
selected channels. All channels are selected by default. Depending on the type and settings of a
unit, checkboxes are enabled only for channels that can be backed up.
To deselect all channels, click Uncheck All.
103
User's Manual
Hide quick links:
Advertisement
Table of Contents
