Event Auto Sequencing
Select On or Off to display an event screen in full screen mode.
Event Time
Select a duration to display an event screen. (3 to 5 seconds.) For the duration, events
occurring in other channels are recorded, but the screen will not switch to the new event
screens.
Sensor
Select a channel to set up a sensor.
- Sensor Type
: Select a channel to set up a sensor.
- N/O
: Normal Open Sensor
- N/C
: Normal Close Sensor
- Off:
: Disabled
4.3.25.3.1 Motion
When the recording mode is set to Motion Detection, set the motion zone and sensitivity for the
channels.
Channel
Select a channel for the MD recording mode.
Motion Zone
Available zones are Full and Partial.
- Partial
: Records the entire screen when movement is detected.
- Partial
: Records only a selected area on the screen when movement is detected.
89
User's Manual