So/Usb Operations - JVC KW-NT1 Instructions Manual

SO/USB
operations
The source changes to "USB" and playback starts.
• Connecting USB device
You can connect aUSB mass storage Class device such as
aUSB memory, Digital Audio Player, etc. to the unit.
• You cannot connect acomputer or portable HOD to
the USB
(f)
terminal of the unit.
------------_._-------
.
8
Insert an SD card.
This unit can play the MP3 files stored in SO card/USB mass storage class device.
• All tracks in the SO card/USB device will be played repeatedly until you change the source.
• Make sure all important data has been backed up.
• Inserting SO card
e
Detach the monitor panel.
Push in the SO card until you hear aclicking
sound.
8
Attach the monitor panel
The source changes to "SO" and playback starts.
To eject the SD card
Detach the monitor panel, then push in the SO card
lightly.
• Avoid using the USB device if it might hinder your
safety driving.
• Do not start the car engine if aUSB device is
connected.
• Do not pull out and attach the USB device
repeatedly while "File Check" is shown on the
screen.
• Disconnect aUSB device while playback is paused
or another source is selected.
• Electrostatic shock at connecting aUSB device
may cause abnormal playback of the device. In
this case, disconnect the USB device then reset
this unit and the USB device.
• Do not leave aUSB device in the car, expose to
direct sunlight, or high temperature to avoid
deformation or cause damages to the device.
• For more details about USB operations,
l1E
page 72.
58