Fixing Problems; Contact Partner In The Case Of Problems; Troubleshooting; Caring For Your Telephone - Siemens HiPath 500 User Manual

Fixing problems

Fixing problems

Contact partner in the case of problems

Contact your service personnel if a fault persists for more than five min-
utes, for example.

Troubleshooting

Pressed key does not respond
Check if the key is stuck.
Telephone does not ring
Check whether the "Do not disturb" function is activated on your tele-
phone. When you lift the handset, you will hear a special tone. If so, deac-
tivate it
You cannot dial an external number
Check whether your telephone is locked. When you lift the handset, you
will hear a special tone. If so, unlock your phone
To correct any other problems
First contact the relevant service personnel. If the service personnel are
unable to correct the problem, they must contact Customer Service.

Caring for your telephone

•
•
•
•
68
page 44.
Never allow the telephone to come into contact with coloring, oily or
aggressive agents.
Always use a damp or antistatic cloth to clean the telephone. Never
use a dry cloth.
If the telephone is very dirty, clean it with a diluted neutral cleaner con-
taining surfactants, such as a dish detergent. Afterwards remove all
traces of the cleaner with a damp cloth (using water only).
Never use aggressive or alcohol-based cleansers on plastic parts. The
use of scouring agents is also forbidden.
page 47.