Controlling Connected Computers Or Their Programs/Tel. Data Service - Siemens HiPath 500 User Manual

More functions/services
Step by Step
)42
0
0
58
Controlling Connected Computers or
Their Programs/Tel. Data Service
If this function has been configured (contact your ser-
vice personnel), you can control connected computers
or programs running on them, such as hotel services or
information systems, from your telephone.
Prerequisite: You have set up a connection.
S
Press the "Consult" key. The LED flashes.
Enter the code.
Press the key shown. The lamp is flashing. Enter the
code.
For entering data, you are guided by the connected
computer. However, depending on configuration (con-
tact your service personnel), you must activate your en-
tries in one of the following ways:
Inputs in en-bloc mode
9
...
Enter data.
(
Complete your entry.
or Inputs in online mode
The connected computer processes your entries direct-
ly.
(
Enter the code.
9
...
Enter data.