Dhcp Configuration - Dinstar DWG2001 User Manual

Dwg series gsm/cdma voip gateway
Table of Contents

Advertisement

                                                                      DWG Series GSM/CDMA VoIP Gateway User Manual 
172 * 16 * 0 * 100 #" hang up when hear    "setting successful" message; 
4) configure subnet mask: Dial the SIM card phone number, enter "*153*255*255*0*0#" hang 
up when hear "setting successful" message; 
5) Configure gateway: Dial the SIM card phone number, enter "*156*172*16*0*1#" hang up 
when hear "setting successful"    message; 
6) Please  wait  about  ten  seconds  when  finishing  the  operations,  restart  device.  dial  the  SIM 
card phone number, enter "*158#"to check the Static IP address; 
 
3.5 DHCP configuration 
DHCP mode configure as follows: 
1) Insert an SIM in one of the port, Dial the SIM card phone number. When hearing a message, 
then enter  "*150*1#", hang up when hearing " setting successful" message; 
2) Restart the device, wait for 30 seconds, and then dial the SIM card telephone number, enter 
"* 158 #" to query the IP address; 
Note: If reporting the IP address is 0.0.0.0, which means that the gateway could not obtain a IP 
address successfully. Please check: 
1) Make sure the device have been connected to the network; 
2) Make sure the DHCP Server is working. If there is no DHCP Server, please set the IP of device 
to static IP . 
 
 
 
 
 
 
 
 
 
 
13 

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DWG2001 and is the answer not in the manual?

This manual is also suitable for:

Dwg2004Dwg2008

Table of Contents