Panasonic WV-SW390 Series Operating Instructions Manual page 81

–
H.264(2): QVGA/ 800x600
When "16:9" is selected for "Aspect ratio"
–
H.264(1): 320x180/ 640x360/ 1280x720
–
H.264(2): 320x180/ 640x360
•
Default:
–
H.264(1): 1280x960
–
H.264(2): VGA
[Transmission priority]
Select a transmission priority for H.264 images from the following.
•
Constant bit rate: H.264 images will be transmitted with the bit rate selected for "Max bit rate (per
client)*".
•
Frame rate: H.264 images will be transmitted with the frame rate selected for "Frame rate*".
•
Best effort: In accordance with the network bandwidth, H.264 images will be transmitted with the bit rate
varying between the maximum and minimum bit rates that are set for "Max bit rate (per client)*".
•
Default: Frame rate
Note
•
When "Frame rate" is selected for "Transmission priority", number of users who can access the camera
may be limited more (may become less than 10).
[Frame rate*]
Select a frame rate for H.264 images from the following.
1fps/ 3fps/ 5fps*/ 7.5fps*/ 10fps*/ 12fps*/ 15fps*/ 20fps*/ 30fps*
•
Default: 30fps*
Note
•
When "Frame rate" is selected for "Transmission priority", this setting is available.
•
"Frame rate*" is limited by "Max bit rate". For this reason, the frame rate may be lower than the specified
value when any value marked with an asterisk (*) is selected.
[Max bit rate (per client)*]
Select a H.264 bit rate per a client from the following. When "Best effort" is selected for "Transmission
priority", set the maximum and minimum bit rates.
64kbps/ 128kbps*/ 256kbps*/ 384kbps*/ 512kbps*/ 768kbps*/ 1024kbps*/ 1536kbps*/ 2048kbps*/ 3072kbps*/
4096kbps*/ 8192kbps*/ Unlimited*
•
Default:
–
H.264(1): 4096kbps*
–
H.264(2): 1536kbps*
"8192kbps *" is available only when the image capture size is "1280x960" or "1280x720".
"128kbps *" is available only when the image capture size is "QVGA", "VGA", "800x600"
"640x360".
"64kbps" is available only when the image capture size is "QVGA", "VGA" or "320x180", "640x360".
"Unlimited*" is available only when "Frame rate" is selected for "Transmission priority".
Note
•
When "8192kbps *" or "Unlimited*" is selected, the number of users who can access H.264 images will
be limited to "1". (Only a single user can access H.264 images.)
•
The H.264 bit rate is limited by "Bandwidth control(bit rate)" on the [Network] tab of "Network" page
(®page 160). For this reason, the bit rate may be lower than the value when any value with an asterisk
(*) on the right is selected.
•
It is impossible to select "Unlimited*" for both "H.264(1)" and "H.264(2)".
11 Configure the settings relating to images and audio [Image/Audio]
or "320x180",
*1
Operating Instructions 81