Configure The Https Settings - Panasonic WV-SW390 Series Operating Instructions Manual

17 Configuring the network settings [Network]

17.2 Configure the HTTPS settings

Click the [Network] tab on the "Network" page. (®page 43, page 45)
The settings relating to the HTTPS protocol that can enhance the network security by encrypting the access
to cameras on this page.
The HTTPS settings will be configured in the following procedure.
When using the self-signed certifi cate
Generation of the self-signed certi ficate
Generation of the CRT key (SSL encryption key) (®page 169)
Generation of the self-signed certificate (®page 170)
Generation of CSR (Certificate Signing Request) (®page 172)
Installation of the server certificate (®page 173)
Configuration of the connection protocol (®page 174)
168 Operating Instructions
Generation of the CRT key (SSL encryption key)
Con figuration of the connection protocol
Access to the cameras using the HTTPS protocol
When using the server certi ficate
Generation of CSR (Certi ficate Signing Request)
Application for the approval by CA
(Certi ficate Authority) - Issue of the server certifi cate
Installation of the server certi ficate
A
B
C
D
E