Configure The Settings Relating To The Ftp Periodic Image Transmission [Ftp Img. Trans.]; Trans.] - Panasonic WV-SW390 Series Operating Instructions Manual

•
Available number of characters: 0 - 32 characters
•
Default: None (blank)
[Location]
Enter the name of the location where the camera is installed.
•
Available number of characters: 0 - 32 characters
•
Default: None (blank)
[Contact]
Enter the mail address or the phone number of the SNMP manager.
•
Available number of characters: 0 - 255 characters
•
Default: None (blank)
17.6 Configure the settings relating to the FTP
periodic image transmission [FTP img. trans.]
Click the [FTP img. trans.] tab on the "Network" page. (®page 43, page 45)
The settings relating to the periodic transmission of images to an FTP server can be configured on this page.
To transmit images to an FTP server periodically, it is necessary to configure the settings of the FTP server in
advance (®page 156). Refer to page 193 for descriptions of how to configure schedules of image
transmission.
IMPORTANT
•
Depending on the network line speed or the network traffic, images may not be transmitted at the exact
designated interval or period.
•
Select "FTP error" for "Save trigger" on the [SD memory card] tab when using the FTP periodic
transmission function.
•
When "On" is selected for both of the alarm image transmission function and the FTP periodic image
transmission function, the alarm image transmission function will be given priority over the FTP periodic
image transmission function. For this reason, images may not be transmitted at the exact designated
interval or period if alarms occur frequently.
Note
•
When "FTP error" is selected for "Save trigger" on the [SD memory card] tab, images that have failed
to transmit using the FTP periodic image transmission can be saved automatically on the SD memory
card. (®page 32)
17 Configuring the network settings [Network]
Operating Instructions 191