Configure The Settings Relating To Jpeg Images [Jpeg/H.264] (Or [Jpeg/Mpeg-4]) - Panasonic WV-SW390 Series Operating Instructions Manual

11 Configure the settings relating to images and audio [Image/Audio]
11.2 Configure the settings relating to JPEG images
[JPEG/H.264] (or [JPEG/MPEG-4])
Click the [JPEG/H.264] tab (or [JPEG/MPEG-4] tab) on the "Image/Audio" page. (®page 43, page 45)
JPEG
Configure the settings such as "Refresh interval (JPEG)*", "Image capture size" and "Image quality" on this
section. Refer to page 78 and page 84 for further information about the settings relating to H.264 (or
MPEG-4) images.
"Live" page (Initial display)
Configure the settings relating to the JPEG images displayed on the "Live" page.
[Refresh interval (JPEG)*]
Select an interval to refresh the displayed JPEG image from the following.
SW396 SC386
0.1fps / 0.2fps / 0.33fps / 0.5fps / 1fps / 2fps / 3fps / 5fps / 6fps*/ 10fps*/ 12fps*/ 15fps* / 30fps*
•
Default: 5fps
:
SW395 SC385
0.1fps / 0.2fps / 0.33fps / 0.5fps / 1fps / 2fps / 3fps / 5fps / 6fps/ 10fps/ 12fps*/ 15fps* / 30fps*
•
Default: 10fps
Note
•
When "On" is selected for "H.264 transmission" (or "MPEG-4 transmission"), the refresh interval may
be longer than the set value when any value with an asterisk (*) on the right is selected.
[Image capture size]
Select the image capture size to display the JPEG image on the "Live" page for the first time.
When "4:3" is selected for "Aspect ratio"
QVGA/ VGA/ 1280x960
When "4:3 (VGA)" is selected for "Aspect ratio"
QVGA/ VGA/ 1280x960
When "4:3 (800x600)" is selected for "Aspect ratio"
QVGA/ 800x600/ 1280x960
When "16:9" is selected for "Aspect ratio"
320x180/ 640x360/ 1280x720
76 Operating Instructions
:
SC384
SC384
SW396 SW395
SW396 SW395
SC386 SC385
SC386 SC385