ENGINE ASSEMBLY AND ADJUSTMENT
6. Tighten:
• clutch securing nut
use sheave holder
spanner (41 mm)
Sheave holder
90890-01701
Clutch securing nut
50 Nm (5.0 m • kg)
7. Install:
• dowel pin
• gasket
• secondary assembly
• clutch housing
8. Tighten:
• nut
(secondary sheave)
Use sheave holder
Sheave holder
90890-01701
Nut (secondary sheave)
40 Nm (4.0 m • kg)
EAS00323
ASSEMBLING THE PRIMARY SHEAVE
1. Clean:
• primary sliding sheave face
• primary fixed sheave face
• collar
• primary sheave weights
• primary sliding sheave cam surface
2. Install:
• primary sheave weights
• cam
• slider
• collar
NOTE:
Before installing the primary sheave weights,
lubricate the inside and outside of each
weight.
4-34
ENG