Engine Remounting - Yamaha CS50 Service Manual

ENGINE ASSEMBLY AND ADJUSTMENT
6. Install:
• central stand
• spring
• axle
• clasp
• rubber washer
• strap loop
7. Install:
• brake shoes
• flat washer
• rear wheel
• rear brake cable

ENGINE REMOUNTING

When the engine is being assembled, reverse
the removal procedure.
1. Install:
• engine assembly bolt
• rear shock absorber bolt
Engine mounting bolt
84 Nm (8.4 m • kg)
Rear shock absorber bolt (lower)
18 Nm (1.8 m • kg)
2. Install:
• carburetor
• oil supply pipe
• fuel pipe
• autochoke lead
• air filter box assembly
• water pipes of carburator
NOTE:
• Align the projection of the carburetor with
the projections of the carburator joint.
• Before installing the oil supply pipe, fill it
with oil.
3. Install:
• oil pipe (oil tank)
• head cylinder coolant pipe (CS50Z only)
• spark plug cap
NOTE:
Pass the oil supply pipe and the oil pipe
through as shown.
4-41
ENG
(lower)
(CS50Z only)