Manual Operations; Starting Programs Manually - Toro ECx User Manual

Manual Operation
Manual control operations enable the automatic watering
programs to be started at any time. During operation
temporary changes can be made to increase or
decrease zone run time, step through the watering zone
sequence and pause or stop watering. Upon completion
of a manual watering operation the timer will return to the
Automatic mode.

Starting Programs Manually

Watering programs can be started individually or set to
start in order. When one program finishes the next
selected program will operate.
1 Ensure the control dial is in the
2 Position the
PROGRAMS
you wish to start.
3 Press the
MANUAL START
4. To select additional programs, repeat step
Note: Additional programs set to start will operate
one at a time in alphabetical order regardless of the
order they were selected. Each program letter will be
displayed as it is selected. The program currently
operating is indicated by the flashing letter.
/ position.
AUTO ON
switch to select a program
button.
2 and
Flashing
1
AUTO / ON
RAIN
DELAY
OFF
SEASON
ADJUST
SET ZONE
RUN TIMES
Example: Program A is operating. Program B will start
when program A is finished.
3 .
Flashing
PGM A B
1 2 3 4
SET TIME / DAY
ON
3 5
MANUAL
SET
START
WATERING
DAYS
SET
PROGRAM
OFF
START
2
TIMES
PROGRAMS
4
NEXT
4
27