Table of Contents
Advertisement
Manual Operation
Manual operation enables the automatic watering pro-
grams or selected zones assigned to the program to be
started manually. During operation, temporary changes
can be made to increase or decrease the valve run time,
step through the valve sequence and pause or stop
watering using the "Watering Control Features"
described on page 29. Upon completion of the manual
watering operation, the controller will return to the Auto-
matic mode.
Starting Programs and/or Zones Manually
You may choose to operate all zones or selected zones
in each program. Watering programs can be started
individually or set to start in order. When one program
finishes the next selected program will operate.
Ensure the control dial is in the
Position the
PROGRAMS
you wish to start.
Choose one of the following manual operations:
• To operate the selected program with all
assigned zones, press the
button two times to begin watering.
• To operate only selected zones, press the
MANUAL START
to select the flashing zone number, or press the
–/
button to skip the zone number. Continue
OFF
selecting or omitting zones in this manner. When
only the desired zones are displayed, press the
28
MANUAL START
/
position.
AUTO
ON
switch to select the program
MANUAL START
button, then press the +/
ON
button again to begin watering.
Flashing
Example: Program A is operating. Program B will start
when program A is finished.
4. To select additional programs, repeat steps
Note: Additional programs set to start will operate
one at a time in alphabetical order. Each program
letter will be displayed as it is selected. The program
currently operating is indicated by the flashing pro-
gram letter.
button
Flashing
and
.
Hide quick links:
Advertisement
Table of Contents
