Table of Contents
Advertisement
Digital Multiplexer
6.Alarm/Loss list reference
[ALARM/LOSS LIST]
YY/MM/DD HH:MM:SS
CH
1. 00/ 02/ 01 12: 30: 30 A 1
2. 00/ 01/ 31 12: 30: 30 L 2
3. 00/ 01/ 30 12: 30: 30 L 3
4. 00/ 01/ 29 12: 30: 30 A 4
5. 00/ 01/ 28 12: 30: 30 M 5
6. 00/ 01/ 27 12: 30: 30 M 10
7. 00/ 01/ 26 12: 30: 30 A 16
8. 00/ 01/ 25 12: 30: 30 L 3
9. 00/ 01/ 24 12: 30: 30 A 13
10. 00/ 01/ 23 12: 30: 30 A 11
Position is changed
depending on the date
display type.
- Page moves if pressing "
- Update is performed if loss occurs and motion is detected in the status that list is displayed.
- The list screen disappear and alarm operation is performed in the status that list is displayed.
- The oldest information, namely the last page is erased page by page if pressing the "RESET/ERASE" button.
7.Operation in video loss
8.Operation in motion detection
If pressing the "LIST" button on the front, alarm, channel loss and motion detection information recently
occurred is output up to 100EA (10EA x 10 page) on screen in the occurrence as follows:
Current page/ current page
1/3
RIGHT
CH
11. 00/ 01/ 22 12: 30: 30 A
12. 00/ 01/ 21 12: 30: 30 L
13. 00/ 01/ 20 12: 30: 30 L
14. 00/ 01/ 19 12: 30: 30 A
LEFT
15. 00/ 01/ 18 12: 30: 30 M
16. 00/ 01/ 17 12: 30: 30 M
17. 00/ 01/ 16 12: 30: 30 A
18. 00/ 01/ 15 12: 30: 30 L
19. 00/ 01/ 14 12: 30: 30 A
20. 00/ 01/ 13 12: 30: 30 A
ALARM
: "A"
LOSS
: "L"
MOTION : "M"
", "
The following operation is performed if the failure occurs in signal due to poor cable and cutting, etc for the
channel that is set to "ON" in the "LOSS DETECT" of the "2.MON OUT SET" in the main menu:
1) Warning tone sounds (if buzzer turns "ON").
2) Loss information (date and time when loss occurs) is recorded on the alarm/loss list.
3) The "RESET" LED blinks.
4) Display loss information on screen using character (if the loss information turns "ON").
The following operation is performed if the motion is detected in the channel set to "6.MOTION SET" in the
main menu:
1) Warning tone sounds (if buzzer turns "ON").
2) Information (date and time when motion detection occurs) is recorded on the alarm/loss list.
3) The "RESET" LED blinks.
4) Display motion detection information on screen using character (if the "LIST UPDATE" of the "MOTION
SET" is set to "ON").
5) Alarm output (HOT, COLD) signal becomes active.
(If the "ALARM OUT" setting of the "6.MOTION SET" is set to "ON")
2/3
[ALARM/LOSS LIST]
YY/MM/DD HH:MM:SS
RIGHT
1
2
3
4
LEFT
5
10
16
3
13
11
" button.
7-2
3/3
[ALARM/LOSS LIST]
YY/MM/DD HH:MM:SS
CH
21. 00/ 01/ 12 12: 30: 30 A
1
22. 00/ 01/ 11 12: 30: 30 L
2
23. 00/ 01/ 10 12: 30: 30 L
3
24. 00/ 01/ 09 12: 30: 30 A
4
25. 00/ 01/ 08 12: 30: 30 M
5
26. 00/ 01/ 07 12: 30: 30 M 10
27. 00/ 01/ 06 12: 30: 30 A 16
28. 00/ 01/ 05 12: 30: 30 L
3
29. 00/ 01/ 04 12: 30: 30 A 13
30. 00/ 01/ 03 12: 30: 30 A 11
Advertisement
Table of Contents
