Digital Multiplexer
Precautions when Installing
Precautions when Installing
¥ Be sure to turn the unit off before installing.
¥ Avoid shock or vibration since
they may cause unit malfunction.
¥ Keep away from magnets, radio or TV to avoid magnetic
damage.
¥ During or after installing the unit, be sure to maintain the
area around the unit clean.
¥ Place the unit on a flat surface and maintain temperature
properly. Allow 15 cm of clearance between the rear
panel and the wall.
¥ Be careful not to drop any conductive materials into the
hole for ventilation
2-2
15Cm