Table of Contents
Advertisement
Digital Multiplexer
Chapter 4. Basic Method to use
Initial operation
1. Turn on power switch.
2. Setup a recording channel.
3. Change it to a desiring indication mode.
When desiring to see in the live screen/replay screen
The "live/P.B" select button determines the live screen/replay screen mode.
The LED turns on in the live mode and it turns off in the tape replay mode.
If pressing this button, the indication mode is changed to the replay mode for the live mode and to the live
mode for the replay mode.
When desiring to see in the TRIPLEX screen
The "TRIPLEX" button sets the TRIPLEX screen mode. In this case the LED turns on and the previous
TRIPLEX division mode is set.
A 4-division screen appears on the monitor if firstly operating after purchase. In this case, the channel with-
out inputting appears in the blue background on the screen and a video loss occurs.
(The current operation status is memorized when the power turns off after completing the initial setting
and thus the unit operates in the operation status when the power turns off if turning power on.)
Set the channel without inputting to "off" in the "DUTY SET" of "1.REC OUT SET" on the program
menu.
- Indication of FULL screen: The selected channel is indicated on monitor in the form of FULL channel.
- Indication of division screen: The division screen is indicated on monitor if pressing the multi-screen
button. Resetting channel is available for the division screen if user wants.
- Indication of automatic sequential conversion: The full screen is automatically converted if pressing the
sequence button.
- Indication of stop screen: A desired channel can be seen in a form of stop screen using the freezing
button and camera selection button.
- Indication of live/P.B: The current camera signal may be monitored or the recorded screen may be
reproduced for a view using the live/P.B button.
- Indication of TRIPLEX screen: The current camera signal and the recorded screen may be seen on the
same monitor using the TRIPLEX button.
- Indication of PIP screen: The PIP (picture in picture) screen may be seen using the PIP button.
- Indication of expansion screen: The full screen may be expanded up to 4 times for view using the zoom
and move button.
- Indication of record check screen: The recorded output screen or the output screen of VCR may be
seen using the REC CHECK button.
The "LIVE/P.B" button does not operate in the following cases:
- During zoom operation
- In setting of program mode
- In displaying ALARM/LOSS LIST on screen
The "TRIPLEX" button does not operate in the following cases:
- During zoom operation
- In setting of program mode
- In displaying ALARM/LOSS LIST on screen
4-1
Advertisement
Table of Contents
