Samsung SDM-160 User Manual page 32

Digital Multiplexer
- The blinking character moves if pressing "
- The setting value is changed if pressing "
AREA SET: CH1 ~ CH16
ALARM OUT: OFF
LIST UPDATE: OFF
BUZZER: OFF
- The background screen is changed to the relevant channel and the following screen is displayed if pressing the
¥ The
¥ In setting to PIXEL unit: Move to the line to detect using the "
¥ In selection of line: The line is selected if pressing "
¥ In selection of whole of area: Press the "ENTER" button.
¥ The changed setting value is stored if pressing the "SET" button and you can return to the "MOTION SET" menu.
SENSITIVITY: OFF LOW
¥ Set sensitivity of motion detection.
¥ Do not perform motion detection if "OFF".
¥ Set the motion detection area for each channel.
ON
¥ Set the alarm output in the motion detection.
ON
¥ Set whether detection contents are recorded on the list.
ON
¥ Set existence of warning sound in the motion detection.
"ENTER" button with the blinking indication placed at the "AREA SET":
X X X X X X X X X X X
X X X X X X X X X X X
X X X X X X X X X X X
X X X X X X X X X X X
X X X X X X X X X X X
X X X X X X X X X X X
X X X X X X X X X X X
X X X X X X X X X X X
X X X X X X X X X X X
X X X X X X X X X X X
X X X X X X X X X X X
X X X X X X X X X X X
position is a detection area.
~ 16) button equivalent to the desired position. It is released if pressing the button once more.
the " ", " " button. In case of release, press the "
Press the "ENTER" button in release.
", " " button.
", " " button.
MEDIUM HIGH
" button after moving to the line to detect using
" button.
5-8
", " " button and press the "CAMERA SELECT" (1