GE MDS 4790M Installation And Operation Manual page 96

soft carrier de-key delay (SCD command) 40
start of new message (DMGAP command) 34
transmit timeout (LCD screen) 55
transmit timeout duration (LCD screen) 55
TOT command (set/display time-out timer) 43
Transceiver board
assembly 67
display active (RADIO command) 38
removal, illustrated 67
removing or replacing 3, 67
Transmit
audio boost, enable/disable (Transmit Gain screen) 58
level, set/display (Transmit Level screen) 58
timeout value, display (Transmit Timeout screen) 55
timeout value, set (Transmit Timeout Duration screen) 55
Transmit Frequency screen 53
Transmit Gain screen 58
Transmit Level screen 58
Transmit Timeout Duration screen 55
Transmit Timeout screen 55
Transmitter
de-key (DKEY command). See also KEY command 33
specifications 72
state, set/display (Manual Key screen) 56
Transmitter Status screen 62
Troubleshooting
returning product for service. See inside rear cover
Troubleshooting. See Problem solving or Diagnostics
TX ALR LED 22
TX command (set/display transmit frequency 43
TXGAIN command (enable/disable transmit audio boost) 44
TXLEVEL command (set/display transmit audio level) 44
U
Unit Address screen 57
UNIT command (set/display radio's address) 44
Up/down arrow buttons 47
use in radio configuration 48
V
Voice communications 19
Volts, conversion to dBm or watts, table 80
W
Watts
conversion to dBm or volts, table 80
Windows PC. See PC 23
Wiring interface, connections 17
I-8 MDS 4790M (MPT 1411) I/O Guide MDS 05-3628A01, Rev. B