GE MDS 4790M Installation And Operation Manual page 59

MDS 05-3628A01, Rev. B
Table 12. Front Panel Screens—Operating Parameters (Continued)
FRONT PANEL
SCREEN PC COMMAND
Modem MODEM [9600M,
Details, page 54 MPT1411]
Details, page 36
Push to Talk Delay PTT [0-255]
Details, page 55 Details, page 38
Radio Selection RADIO [A/B/AUTO]
Details, page 61 Details, page 38
Receive Frequency RX [xxx]
Details, page 54 Details, page 39
Receive Level [–20 to +3] RXLEVEL [–20 to +3]
Details, page 58 Details, page 39
Receive Pad RXPAD [ON/OFF]
Details, page 58 Details, page 40
Repeater Mode REPEATER [ON/OFF]
Details, page 56 Details, page 38
RX Timeout [NONE,
1-1440]
Details, page 56
Set Date DATE [mmm dd yyyy]
Details, page 60 Details, page 33
Set Time TIME [hh:mm:ss]
Details, page 60 Details, page 43
Transmit Timeout SCD [0-255]
Details, page 55 Details, page 40
Transmit Frequency TX [xxxx]
Details, page 53 Details, page 43
Transmit Gain TXGAIN [ON/OFF]
Details, page 58 Details, page 44
Transmit Level [–20 to TXLEVEL [–20 to +3,
+3, AUTO] AUTO]
Details, page 58 Details, page 44
Transmit Timeout
Details, page 55
Transmit Timeout Dura-
tion
Details, page 55
MDS 4790M (MPT 1411) I/O Guide
DESCRIPTION
Set or display internal modem speed
Set or display the amount of time to wait after
host computer asserts RTS before keying the
radio and beginning transmittal
Set or display the active transceiver board;
enable or disable automatic switch-over
Set or display the receive frequency
Set or display the radio's audio transmit level
when the radio is operating in analog mode
Enable or disable the receive attenuator for
the receive audio level
Enable or disable repeater mode
Set or display amount of time to wait without
data receipt before generating an alarm and
switching to the stand-by transceiver board
Set or display the date
Set or display the time
Set or display amount of time to wait after a
de-key request before actually de-keying the
radio
Set or display the transmitter frequency
Enable or disable the transmit audio boost for
the transmit audio level
Set or display the radio's audio transmit level
when the radio is in analog mode
Enable or disable the Transmit Timeout timer
(time to wait before disabling the transmitter
to prevent unnecessary use of the frequency)
Set or display the Transmit Timeout duration
(time to wait before disabling the transmitter
to prevent unnecessary use of the frequency)
51