Sharp ER-A770 Instruction Manual page 169

Stacked report (continued)
• 27 HOURLY (Use the numeric entry)
Hourly report
Parameter: Start time/end time (0 thru 2345)
NOTE
To take the hourly Z report, you have to specify the full-range hourly report.
• 28 LABOR COST%
Labor cost percent report
• 29 OVER TIME (Use the numeric entry)
Employee over time report
Parameter: Start employee code/end employee code (1 thru 9999999999)
• 30 EMPLOYEE SUMMARY
Employee summary report
Parameter: Start employee code/end employee code (1 thru 9999999999)
• 31 DAILY NET
Daily net report
• 32 INGREDIENT STOCK (Use the numeric entry)
Ingredient stock report
Parameter: Start ingredient code/end ingredient code (1 thru 999)
• 33 GLU (Use the numeric entry)
GLU/PBLU report
Parameter: Start GLU code/end GLU code (1 thru 99999999)
• 34 GLU BY SERVER (Use the numeric entry)
GLU/PBLU report by server
Parameter: Server code (1 thru 9999/Up to 255 servers can be assigned.)
• 35 CLOSED GLU (Use the numeric entry)
Closed GLU/PBLU report
Parameter: Start GLU code/end GLU code (1 thru 99999999)
• 36 CL-GLU BY SERVER (Use the numeric entry)
Closed GLU/PBLU report by server
Parameter: Server code (1 thru 9999/Up to 255 servers can be assigned.)
• 37 DRIVE THRU (Use the numeric entry)
Drive-through report
Parameter: Start drive-through code/end drive-through code (1 thru 99999999)
• 38 D-THRU BY SERVER (Use the numeric entry)
Drive-through report by server
Parameter: Server code (1 thru 9999/Up to 255 servers can be assigned.)
• 39 CLOSED D-THRU (Use the numeric entry)
Closed drive-through report
Parameter: Start drive-through code/end drive-through code (1 thru 99999999)
• 40 CL-DT BY SERVER (Use the numeric entry)
Closed drive-through report by server
Parameter: Server code (1 thru 9999/Up to 255 servers can be assigned.)
• 41 SERVICE TIME
Drive-through service time report
167