Table#/Pblu Code; Drive-Through Code - Sharp ER-A770 Instruction Manual

Table#/PBLU code

You can program the range of available guest check codes (table# or PBLU code).

Drive-through code

You can program the range of available drive-through codes.
174
Program each item as follows:
• START CODE (Use the numeric entry)
Start GLU code (max. 8 digits: 1 to 99999999)
• END CODE (Use the numeric entry)
End GLU code (max. 8 digits: 1 to 99999999)
Program each item as follows:
• START CODE (Use the numeric entry)
Start drive-through code (max. 8 digits: 1 to 99999999)
• END CODE (Use the numeric entry)
End drive-through code (max. 8 digits: 1 to 99999999)
• TIME (Use the numeric entry)
Drive-through target time:
Enter the minute (2 digits) and the second (2 digits) in this
sequence.
NOTE
When the customer's waiting time is over the programmed
target time, the terminal will display a warning.