Electronic Journal - Sharp ER-A770 Instruction Manual

14

Electronic Journal

This function is intended to record the journal data in the electronic journal file (memory) when
the journal printer is not available. For details, contact your authorized SHARP dealer.
Recording data
The POS terminal records the printing output to the journal printer in REG, PGM1, PGM2, X1/Z1, and X2/
Z2 modes into the electronic journal file.
Full reporting (X report)
The POS terminal reports the journal data (same as normal journal formats) in the electronic journal file by
the report printer or the display.
Operation: Select the reading operation "E.JOURNAL" in X1 mode.
It is possible to take filter functions (consecutive no./date/server)
C.C NO. (consecutive no).: All or RANGE(start no./end no.)
Date:
Server:
When RANGE or INDIVIDUAL is selected, the window to specify the corresponding range or server code
is individually appeared after all the three options are selected.
Partial reporting (in REG mode)
Your POS terminal can report the last five transactions data only out of the journal data by the report
printer.
Operation: Press
MISC
FUNC
Resetting (Z report)
It is possible to take the resetting report of the journal data (same as normal journal formats) in the
electronic journal file by the report printer.
Operation: Select the resetting operation "E.JOURNAL" in Z1 mode.
The filter function (consecutive no./date/server) can not be used (always "ALL").
198
All or RANGE (start code./end code.)
All or INDIVIDUAL(server code)
key and select "11 EJ PRINT", the report will be printed.