Table of Contents
Advertisement
Running LSI Software RAID Configuration Utility
1.
When the following screen appears after you have powered on the server, press Esc.
The POST screen appears.
2.
Check the description as shown below on the POST screen, then press Ctrl + M.
LSI Software RAID Configuration Utility starts.
If you fail to press Ctrl + M and the system proceeds without displaying the following
menu screen, restart the system, and press Ctrl + M on POST screen.
LSI Software RAID Configuration Utility TOP Menu (Management Menu)
LSI SoftwareRAID BIOS Version xxxxxx
LSI MPT RAID Found at PCI Bus No:xx Bev No:xx
Scanning for port 00 Responding xxxxxxxx xxxxMB
Standard FW xxx DRAM=128MB(SDRAM)
xx Logical drive(s) Configured
Press <Ctrl><M> to Run LSI Software RAID Configuration Utility
Configuring Your Server 4-45
Advertisement
Table of Contents
Troubleshooting
