Table of Contents
Advertisement
4-18 Configuring Your Server
USB Configuration submenu
When [USB Configuration] is selected in the Advanced menu and then the Enter key is pressed, the
screen below is displayed.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main
Serial Port A Settings
Serial Port A
Serial A Base I/O
Serial A Interrupt
Serial Port B Settings
Serial Port B
Serial B Base I/O
Serial B Interrupt
Console Redirection Settings
BIOS Redirection Port
Version 1.24.1115n Copyright (C) 2010 American Megatrends, Inc.
For details about the options, see the following table.
Option
USB 2.0 Support
Device Reset Timeout
Advanced
Security
[Enabled]
[3F8h]
[IRQ 4]
[Enabled]
[2F8h]
[IRQ 3]
[Disabled]
Parameters
Disabled
[Enabled]
10 sec
[20 sec]
30 sec
40 sec
Server
Boot
Save & Exit
Configures serial port A using
options.
[Disabled]
No configuration
[Enabled]
User configuration.
F1: General Help
F4: Save ESC: Exit
Specify whether to enable or
disable USB 2.0.
Specify the time to wait
when issuing a Start Unit
command to a USB mass
storage device until a
timeout occurs.
Description
[
]: Factory-set
Advertisement
Table of Contents
Troubleshooting
