5.25-inch Device
The server contains three slots in which backup devices including optical disk drive and magnetic
tape drive can be installed. The optical disk drive is factory-installed in bottom slot. You need
separately priced SCSI controller or SAS controller depending on the type of backup drive.
Slot 3
Slot 2
Slot 1
IMPORTANT:
Two single-height devices or one double-height device can be
installed.
Set the SCSI termination of the device to be installed to OFF and
assign a unique SCSI ID not duplicated or corrupted with that of
any other device. Refer to the documentation coming with each of
the devices for how to assign an ID.
For single-height device, first install a device in slot 1. Then install
another device in slot 2.
For double-height device, install the device to the slots 2 and 3.
Upgrading Your Server 9-57