NEC Express5800 User Manual page 103

Boot
When the cursor is moved to the [Boot] position, the Boot menu is displayed.
For details about the options, see the following table.
Option
Boot Configuration
Quiet Boot
Bootup Numlock State
Setup Prompt Timeout
Boot Option Priorities
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
Parameters
−
Disabled When this option is set to [Disabled], the
results of POST execution are displayed
[Enabled]
instead of the NEC logo after the power is
turned on.
If [BIOS Redirection Port] is enabled, this
option is shown as [Unavailable] and
inaccessible. The Quiet Boot feature
always disabled.
If [BIOS Redirection Port] is disabled, the
default setting is displayed at the next
startup of SETUP, and you can change
setting.
On Specify whether to enable or disable the
Numlock state when the system starts up.
[Off]
A number Specify the time until the F2 is pressed to
launch SETUP during POST.
−
These items display the priority of boot
−
devices.
−
If all of the Boot Options are set to
−
[Disabled], the SETUP starts running upon
−
completion of POST.
Configuring Your Server 4-33
Description
−
−