NEC Express5800 User Manual page 349

Installation
Install a hard disk drive in the following procedure. A hard disk drive may be installed in any other
slot in the similar procedure.
IMPORTANT:
Fill the bays bottom-to-top.

In RAID system, hard disk drives should have the same

specification including the capacity.
NOTE:
only by opening the front door. In the RAID system, hard disk drives
may be installed or removed with the power of the server being on.
1.
Release the lock of the front door by using the security key to open the front door.
2.
Locate the slot in which the hard disk drive is installed.
There are four slots. The port numbers are defined depending on the locations of the slots
(PORT0 to PORT3 from bottom to top).
3.
Hold the handle of the dummy tray and remove the dummy tray.
IMPORTANT:
Keep the removed dummy tray for future use.

The purpose of a dummy tray is to increase the cooling effect in the

server. Install a dummy tray in slots not containing a hard disk
drive.
Hard disk drives can be installed or removed from the server
Upgrading Your Server 9-11