Manual Setup; Creating Logical Drive Of Raid 6 - NEC Express5800 User Manual

6-24 Installing and Using Utilities

Manual Setup

Windows
You can start the setup program of Universal RAID Utility from [Autorun Menu].
Click [Setup Software] → [Universal RAID Utility] in [Autorun Menu].
You need to install the following software.
Microsoft .NET Framework 2.0 or later

The Runtime component of the Microsoft Visual C++ 2005 SP1

You can install these software from [Autorun Menu] too.
Click [Setup Windows] → [Install the .NET Framework Ver 2.0 Redistributable Package (x86)] (If
CPU architecture is x64, [Install the .NET Framework Ver2.0 Redistributable Package (x64)]) in
[Autorun Menu] for the setup of Microsoft.NET Framework 2.0.
Click [Setup Windows] → [Install the Microsoft Visual C++ 2005 SP1 Redistributable
Package(x86)] (Use the x86 package whatever the CPU architecture may be.) for the setup of the
Runtime component of the Microsoft Visual C++ 2005 SP1.
Linux
You need to run the setup.sh in the install image of Universal RAID Utility.
There is the install image of Universal RAID Utility in the following directory of NEC
EXPRESSBUILDER.
/BBB/lnx/pp/uraidutl
The part of BBB is BBB of the medium number (5.AA-BBB.CC) of NEC EXPRESSBUILDER.

Creating Logical Drive of RAID 6

You must use four or larger Physical Devices for creating the Logical Drive of RAID 6 by Universal
RAID Utility. If you want to create the Logical Drive from three Physical Devices, you need to use
WebBIOS.