NEC Express5800 User Manual page 192

5-58 Installing the Operating System with Express Setup
LAN Board Driver (N8104-112/119/121/125A/126)
The following LAN Boards are available for the N8104-112/119/121/125A/126.
To use the N8104-125A Adapter, see" Using N8104-125A Adapter after System Update" in the
previous page.
The drivers for other LAN Boards are automatically installed by Windows Plug-and-Play. You do
not need to install them manually.
Graphics Accelerator Driver
If you use standard graphics accelerator drivers, update your system with NEC
EXPRESSBUILDER DVD attached to your system.
Standard graphics accelerator drivers will be installed automatically.
Refer to "Graphics Accelerator Driver" described in Appendix E when you want to reinstall the
driver individually.
Installing SCSI Controller Driver (N8103-75/95/107)
If you use the SCSI Controller N8103-75/95/107, you do not need to install the driver manually. It is
automatically installed by Windows Plug-and-Play.
Installing SAS Controller Driver (N8103-104A)
If you use the SAS Controller N8103-104A, you do not need to install the driver manually. It is
automatically installed by Windows Plug-and-Play.
Installing Fibre Channel Controller Driver (N8190-127/131/153/154)
If you use the Fibre Channel Controller N8190-127/131/153/154, you do not need to install the
driver manually. It is automatically installed by Windows Plug-and-Play.