Call Logging Device; Figure 6-7 Connections For D-Sub 9-Pin To D-Sub 25-Pin Cable - Panasonic DBS 576 Technical Manual

Chapter 6. Peripheral Equipment

Call Logging Device

Guidelines
• You can connect a call logging device such as a call accounting machine or a
• SCC cards cannot be installed and removed while the cabinet is operating. First,
• A 9-pin to 25-pin or 9-pin to 9-pin RS-232C cable is required.
• Table 6-3 shows the pinout for the RS-232C ports (CN5 and CN6) of the SCC
Making an RS-232C Cable
Depending on the RS-232C connector on your call logging device, you will need to
make one of the following RS-232C cables.
• D-SUB 9-pin to D-SUB 25-pin
Figure 6-7. Connections for D-SUB 9-pin to D-SUB 25-pin cable
6-10
printer to an SCC card in an optional card slot.
turn the power off.
card.
• If your call logging device is equipped with a 25-pin D-SUB RS-232C
connector, make a cable as shown in Figure 6-7. The cable should be less than 50
ft. long.
DBS 576 (USA), issued 6/2/98
Section 300-Installation
SCC card
576-13-300