Chapter 6. Peripheral Equipment
This chapter describes how to install and connect DSS, doorphone adaptors, other
peripheral equipment, and replacing the backup battery of CPC card.
Music-On-Hold (MOH)
CPC96, CPC288, CPC576 Card
Guidelines
• A music source such as a CD player or tape recorder can be connected to the
• CPC96, CPC288, and CPC576 cards cannot be installed and removed while the
• The maximum input impedance of the MOH input (CN4: RCA) is 10k
Installation
1. Connect one end of an RCA pin cable (2-core shielded cable) to the CN4 (RCA)
2. Connect the other end of the RCA pin cable to the output (AUX) of a music
576-13-300
MOH input of a CPC96, CPC288, or CPC576 card installed in the CPC slots of
the cabinet to provide music-on-hold (MOH).
cabinet is operating. First, turn the power off.
maximum input signal level is -10dB.
connector on the CPC96, CPC288, or CPC576 card.
source such as a CD player or tape recorder.
Fit the appropriate connector (RCA or mini-plug, etc.) as required to the
end of the RCA pin cable to suit your music source.
DBS 576 (USA), issued 6/2/98
. The
Ohms
6-1