Tape Playback; Listening To A Cassette Tape (Tape 1 Or Tape 2) - Sharp CD-G14000 Operation Manual

Listening to a cassette tape (TAPE 1 or TAPE 2)

Before playback:
For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not
recommended.)
Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
5
4
3
2
1
TIMER
POWER
ON/ STAND-BY
CD
TAPE
(1 2)
TUNER
(BAND)
PRESET
AUDIO
IN
TUNING
VOL.
PLAYBACK (PLAY & STOP)
AUDIO
PHONES IN
REMOTE
SENSOR
OPEN/
c CLOSE
5
4
3
PRESET
2
1
TUNING
VOL.
RECORD/PLAYBACK

Tape playback

1
Press the ON/STAND-BY button to turn the power on.
2
Open the cassette
compartment by pushing
the area marked " ".
3
Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment
with the side to be played
facing towards you.
4
Press the TAPE (1 2) button to select the cassette you
want to listen to.
5
Press the / (TAPE )
button to start playback.
Auto power on function:
When you press any of the following buttons, the unit turns on.
TAPE (1 2) button (main unit and remote control): The unit
turns on and the "TAPE" function is activated.
TAPE button on the remote control: The unit turns on and
playback of "TAPE" function starts.
/ button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, AUDIO IN).
Auto power off function:
In the stop mode of tape operation, the main unit enters the stand-
by mode after 15 minutes of inactivity.
5 5 5
CD CD CD
4 4 4
TAPE 1/2
3 3 3
PRESET 2 PRESET PRESET
TUNER(BAND) 2 2
PRESET PRESET PRESET
1 1 1
AUDIO IN
TUNING
VOL. TUNING TUNING
TUNING — VOL. TUNING TUNING VOL. VOL.
— VOL. — VOL.
PHONES MUSIC PORT MUSIC PORT
PHONES PHONES
5
CD
4
3
PRESET
2
PRESET
1
TUNING
TUNING VOL.
— VOL.
PHONES
TAPE 1 TAPE 2
Tape play indicator
CD-G14000
CD-G17000
CD-G22000
ENGLISH
E-33