Advanced Cd Or Mp3/Wma Disc Playback - Sharp CD-G14000 Operation Manual

CD-G14000
Advanced CD or MP3/WMA disc playback (continued)
CD-G17000
CD-G22000
ENGLISH
Programmed play
You can choose up to 32 selections for playback in the order you like.
1
Whilst in the stop mode, press
the MEMORY button to enter the
programming save mode.
2
Press one of the
to select the desired disc.
3
Press the direct search buttons
on the remote control to select
the desired track.
You can also select a track by pressing the
4
Press the MEMORY button to save
the track number.
5
Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
6
Press the (CD ) button.
The total number in memory will
appear.
7
Press the /
E-26
1 - 5 buttons
Selected disc number
Selected track number
or
button to start playback.
To clear the programmed selections:
Press the CLEAR/DIMMER button on the
remote control
indicator is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track
programmed.
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR/DIMMER button on the remote control. The "MEMORY"
indicator will disappear and all the programmed contents will be
cleared.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the original programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the
or button.
button.
Notes:
When a disc with programmed tracks is ejected, the programme
is automatically cancelled.
Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
During the programme operation, random play is not possible.
whilst the "MEMORY"