Listening To The Radio - Sharp CD-G14000 Operation Manual

Listening to the radio

5
4
3
2
1
TIMER
POWER
ON/ STAND-BY
CD
TAPE
(1 2)
TUNER TUNER
TUNER
(BAND)
(BAND) (BAND)
PRESET
AUDIO
IN
TUNING
VOL.
PLAYBACK (PLAY & S TOP)
TUNING TUNING
AUDIO
PHONES IN
Auto power on function:
When you press any of the following buttons, the unit turns on.
TUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.
/ button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, AUDIO IN).
REMOTE
SENSOR
OPEN/
c
CLOSE
5
4
3
PRESET
2
1
TUNING
VOL.
TUNING TUNING
RECORD/PLAYBACK
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3
Press the TUNING ( or
station.
Manual tuning:
Press the TUNING ( or
to tune in to the desired station.
Auto tuning:
When the TUNING ( or ) button is pressed for more than 0.5
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING (
again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
" " will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural,
and the sound becomes clearer.
FM stereo mode indicator
) button to tune in to the desired
) button as many times as required
or ) button
FM stereo receiving indicator
CD-G14000
CD-G17000
CD-G22000
ENGLISH
E-31